Upcoming event

The 26th Symposium on Fusion Technology, Porto, September 27th to October 1st 2010, is soon here! Don’t miss your chance of participating at this event taking place only every two years!

Your link to Registration can be found here.

Contracts awarded

A number of large contracts have been awarded by F4E in recent months. Please consult the corresponding tender information here if there are any products or services you can offer to the prime contractors. Main contracts are:

• 095 Construction of the Tokamak complex seismic isolation pit
• 090 Support to the Owner
• 065 The Supply and the lnstallation of the Anti-Seismic Bearings
• 058 Architect Engineer Contract for ITER buildings and Civil infrastructures (EUROS 150 Mio.)
• 053 ITER Toroidal Field Coils Winding Pack – Lot D (EUROS 156 Mio.)
• 025 Health and Safety Coordination Protection and Legal Inspection Services for ITER Buildings Construction (EUROS 9 Mio.)
• 018 Supply of TF and PF Conductors – Open Procedure

Requests for Information

F4E intermittently requests information to its ILO’s on national competencies in specific fields. This information is useful to F4E for their tender preparation. The latest requests are found here below. Please contact your ILO for any information you can provide!

• Competencies for working with Beryllium
• Competencies for realizing pre-compression rings out of composite material, 5m in diameter and 30×30cm cross-section, capable of withholding centripetal radial forces of 30MN
• Capabilities for cooling 70MW of thermal power at MITICA and SPIDER (Padua, Italy)
• Capabilities for realizing a cylindrical 300m3 liquid-tritium container
• Capabilities for realizing the central command, control and monitoring of the ITER Plant
• Capabilities for realizing Helium-free gyrotron magnets
• Capabilities for realizing Diagnostic Port Plugs at ITER
• Capabilities for realizing the neutral beam test Facility (NBTF) FOR MITICA and SPIDER

Procurements from F4E

Details on all calls can be found here.
The following list gives a general overview of the main procurement activities being carried out.

Framework service contract for provision of sample characterization during the production of Nb3Sn strands to be used in TF conductors

Open Call for tender 145 with deadline September 20th, 2010
Object: Framework contract for determining the properties of the Nb3Sn strands at low and room temperatures. Thousands of tests are foreseen over 4 years.

Fabrication of prequalification semi-prototypes for ITER first wall (FW) panels

Open Call for tender 097 with deadline September 13th, 2010
Object:

• Lot 1: Design and fabrication of five small scale mock-ups and 2 different FW semi-prototypes of the Normal Heat Flux (NHF) design
• Lot 2: Design and fabrication of three small scale heat-sink mock-ups and three small scale Beryllium mock-ups of the enhanced heat flux design

Lots 1 and 2 are mutually exclusive.

ITER Poloidal Field Coils

Negotiated Procedure 086 with deadline September 13th, 2010
Object: Supply of the poloidal field coils 2, 3, 4, 5 and 6, for which a dedicated assembly building is being built on site at Cadarache. Diameters of the coils range from 8m to 24m with weights comprised between 130t to 385t. The tender is split into three stages:

• Stage 1 (firm) – Manufacturing Preparation and Qualification.
• Stage 2 (option) – Fabrication of PF5 and PF6.
• Stage 3 (option) – Fabrication of PF2, PF3 and PF4.

Supply of preliminary fabrication & welding procedure specifications for Test Blanket Modules EUROFER subcomponents

Open Call for Tender 044 with new deadline August 20^th, 2010
Object: Future fusion reactors will need to regenerate the tritium (T) consumed in the D-T reactions and to extract the thermal power generated by the plasma under economically sound conditions for electricity production. These functions shall be ensured by a so called tritium breeder blanket covering the inner side of the vacuum vessel and directly facing the plasma. For several years, Europe and other ITER parties have been developing tritium breeder blankets concepts that will be tested in ITER under the form of Test Blanket Modules (TBMs) located in equatorial ports of ITER. Up to 6 TBM concepts will be tested simultaneously in ITER.

Supply of 7 Vacuum Vessels Sectors

Negotiated Procedure 068 with deadline May 7th, 2010 (preliminary tender) and August 15th, 2010 (final tender).
Object: supply of 7 sectors of the Vacuum Vessel. Each sector is 11m high, 6m wide, is a double-wall stainless steel construction, each shell being 60mm thick. Each sector weighs 240t.
Presently, negotiation is underway with 2 consortia, whose members are posted here.

Please feel free to contact any of the firms in rank 1 if you have a specialty with which you can contribute.
A listing of competent Swiss metallurgical companies (from material suppliers to welding control) can be found here.

Procurements from ITER Organization

Details on all the calls can be found here.

May we remind you that the only requirement at the initial stage is to express your interest per email to ITER-Calls@f4e.europa.eu prior to the deadline with your postal address and contact person. Thereupon F4E will forward your email to ITER Organization in Cadarache, who in turn will send you the complete Terms of Reference. You may then decide if you can/want to submit an offer or not.

Upcoming events

Please refer to the WEB Page “Swiss events“, “Future Conferences” and to the WEB Page “Specific Colloquium and workshop F4E” not to miss any of the future or past events.